Please note that this tool is part of our Labs and our technical support department cannot provide assistance with it. 

What is my current tunnel end point?

Your tunnel end point is the IPv4 IP address you would like us to provide tunnel service to, probably your public facing IP address.

What is my Master DNS Server IP?

This is not required and is optional. Rather than delegating RDNS lookups to the IP we've set our servers up to operate as hidden masters for the routed blocks. Our DNS servers will attempt to transfer the zone from the provided (IPv4) DNS server.

Tunnel Configuration Examples

Please note that these examples are provided for reference only.

Linux Net-Tools

ifconfig sit0 up
ifconfig sit0 inet6 tunnel ::208.201.234.221 
ifconfig sit1 up
ifconfig sit1 inet6 add 2001:05a8:0000:0001:0000:0000:0000:186f/127
route -A inet6 add ::/0 dev sit1

Linux Route2

modprobe ipv6
ip tunnel add sixbone mode sit \
	remote 208.201.234.221 local 209.204.142.42 ttl 255
ip link set sixbone up
ip addr add 2001:05a8:0000:0001:0000:0000:0000:186f/127 dev sixbone
ip route add ::/0 dev sixbone
ip -f inet6 addr

OpenBSD

ifconfig gif0 tunnel 209.204.142.42 208.201.234.221 
ifconfig gif0 inet6 alias \ 
	2001:05a8:0000:0001:0000:0000:0000:186f \
	2001:05a8:0000:0001:0000:0000:0000:186e prefixlen 127
route -n add -inet6 default 2001:05a8:0000:0001:0000:0000:0000:186e

OpenBSD startup example for /etc/hostname.gif0

tunnel 209.204.142.42 208.201.234.221
inet6 alias 2001:05a8:0000:0001:0000:0000:0000:186f 127
dest 2001:05a8:0000:0001:0000:0000:0000:186e
! route add -inet6 default ::1
! route change -inet6 default -ifp gif0

FreeBSD

ifconfig gif0 create
ifconfig gif0 tunnel 209.204.142.42 208.201.234.221
ifconfig gif0 inet6 2001:05a8:0000:0001:0000:0000:0000:186f/127
route -n add -inet6 default 2001:05a8:0000:0001:0000:0000:0000:186e
ifconfig gif0 up

NetBSD

ifconfig gif0 tunnel 209.204.142.42 208.201.234.221 
ifconfig gif0 inet6 \
	2001:05a8:0000:0001:0000:0000:0000:186f \
	2001:05a8:0000:0001:0000:0000:0000:186e prefixlen /127
route -n add -inet6 default 2001:05a8:0000:0001:0000:0000:0000:186e

Cisco

configure terminal
interface tunnel1001
 description Sonic.net IPv6 Tunnel
 no ip address
 ipv6 enable
 ipv6 address 2001:05a8:0000:0001:0000:0000:0000:186f/127
 tunnel source 209.204.142.42 
 tunnel destination 208.201.234.221 
 tunnel mode ipv6ip
ipv6 route ::/0 tunnel0
end
write

Solaris

ifconfig ip.tun0 inet6 plumb
ifconfig ip.tun0 inet6 tsrc 209.204.142.42 tdst 208.201.234.221 up
ifconfig ip.tun0 inet6 addif \
	2001:05a8:0000:0001:0000:0000:0000:186f \
	2001:05a8:0000:0001:0000:0000:0000:186e up
route add -inet6 default 2001:05a8:0000:0001:0000:0000:0000:186e 

How do I setup IPv6 reverse DNS on my tunnel?

Though we do not have configuration examples for all DNS software, you will need to enable transfer and notify to Sonic

Using bind, your zone config should look something like this (note that the leading 0 in zones should be dropped):

zone "4.e.5.4.0.0.0.8.a.5.0.1.0.0.2.ip6.arpa"
{
        type master;
        file "master/2001:05a8:0004:5e4.db";
        allow-transfer { 184.23.168.134; };
        also-notify { 184.23.168.134; };
};

And the zone itself should look something like this:

$TTL 3h
$ORIGIN 4.e.5.4.0.0.0.8.a.5.0.1.0.0.2.ip6.arpa.
@       IN SOA  kleio.microshaft.org kgc.mircoshaft.org.(
                2010121602      ; Serial
                10800           ; Refresh
                3600            ; Retry
                2419200         ; Expire
                604800 )        ; Default TTL


        NS      kleio.microshaft.org.

1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0       IN      PTR     kleio.microshaft.org.

See Also
 

Fusion IPv6 Tool